PRODUCTS DETAILS:
Plastic Primer
Characteristic: Single-component transparent fast drying primer, used to promote adhesion of paint system to plastic parts.
Substrates
Plastic parts, such as PP, PA, PE.
Surface Cleaning
Remove wax, silicon and other contaminations with degreaser, sanding with P600-P800, wash with clean water then keep dry; again with degreaser.
Coating
2 coats, total 4-5um
Re-coat
At 25°C, 5-10 minutes between two coats.
Spray Gun Set Up
Gravity Feed: 1.2-1.5mm 4-5kg/cm2
Suction Feed: 1.4-1.6mm 4-5kg/cm2
Spray Technology
Coats & Thickness: 2-3 coats, total 4-5um.
Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on temperature and paint film.
Shelf Life
2 years in original sealed can, cool and dry place at 20°C.
Package
1L×12
Note:
1. The products are ready for use.
2. It is recommended not to spray thickly to avoid peeling off.
3. Test is recommended before application due to the variety of plastic parts.
FACTORY:
LOADING:
