AUTOMOTIVE REFINISH COLOR PEARL WHITE

Products Inquiry
Click Refresh Verification Code

Description

PRODUCTS DETAILS:


1K TINTER, WHITE PEARL.

Characteristic: 1K basecoat colors with excellent leveling property, easy construction,

excellent adhesion power and coverage power, can match all kinds of solid colors, metallic and pearl effect.

Mainly applies to intermediate cars, MPV and bus.








Substrates

Well-Sanded, Completely dried and good existing finishes as bellow:

A original paint      B. Old paint firm        C. 1K or2k primer

Surface Cleaning

Wash by warm soap, remove wax, silicon and other contaminations with degreaser, sanding with P800-P1000, wash with clean water then keep dry; again with degreaser.

Mixing Ratio

Basecoat Colors

Thinner

1

1

15°C

1K basecoat colors

Fast Thinner

15°C -30°C

1K basecoat colors

Standard Thinner

30°C

1K basecoat colors

Slow Thinner

Spray Viscosity

14-16s to drop off, in 4# viscosity cup at 25°C,

Re- Treatment

After spray, allow 10-20 minutes air-drying time, then spray clear coat at once.

Spray Gun Set Up

Gravity Feed:  1.2-1.5mm   3-5kg/cm2

Suction Feed:  1.4-1.6mm   3-5kg/cm2

Spray Technology

Coats And Thickness: 2-3 coats, total 15-20um.

Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on temperature and paint film.

Shelf Life

2 years in original sealed can, cool and dry place at 25°C.

Package

1L×12 or 3.75L×4

Note:

1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.

2. At ambient temperature higher than 30°C, add appropriate Retarder Solvent into thinner to avoid blushing.

For more details, please refer to technical data sheet of Retarder Solvent.

3. To avoid problems of mottling or poor adhesion, the metallic paint film should be 15-25um.




FACTORY:



LOADING: