Halo effect in blending areas
Source:The SiteAuthor:admin Addtime:2021/6/23 Click:0
Halo effect in blending areas.
Definition
-
Visible edge when blending in from the base coat.
Cause
-
Edge zone sprayed too dry / wet.
-
Incorrect spraying technique.
-
Spraying pressure too high.
-
Spray booth temperature too high.
-
No blend-in additive used.
Prevention
-
Check spray booth temperature.
-
Use blend-in additive in accordance with instructions on the Technical Data Sheets.
Remedy
-
Sand clear coat, and respray base coat and clear coat.
